top of page
Only available for Logged-in member. Please login or register to access this information
WSSFCEX-GHC

Manual for WSLRW-AG | FW8

Normally Stock

Replaced by

Replaced by

Item codes
FW Released Date
Changes Information
WSLRW-AG-03; WSLRW-AG-03S; WSLRWEX-AG-03S; WSLRWEX-AG-03;WSLRW-AG-03S-XA;
10/10/2023
1.Add LoraWAN check message with message type of ConfirmedDataUp; 2.Add password requirement for some parameters when writing with offline tool; 3.Update new sensor for repeatability 0.005 degree at 25oC and measurement range from -30 to +30 degree.; 4.Update payload for X_TILT and Y_TILT with resolution of 0.001

1
QUICK INSTALLATION GUIDE

1.1 Introduction

1.2 Application Notes

1.3 When does device send Uplink messages?

1.4 Default Configuration

1.5 Battery/ Power Supply

1.6 What's in the Package?

1.7 Guide for Quick Test

1.8 Installation

1.9 Payload Document and Configuration Tables

1.10 How to connect device to Back-end/ Network Server/ Coordinator

2
MAINTENANCE

2.1 Troubleshooting

2.2 Maintenance

3
ADVANCED GUIDE

3.1 Principle of Operation

3.2 Configuration

3.3 Calibration/ Validation

4
PRODUCT SPECIFICATIONS

4.1 Specifications

5
WARRANTY & SUPPORT

5.1 Warranty

5.2 Support

bottom of page